Nitronic 60 Rod

Nitronic 60 Size: 8mm-200mm Materials: Inconel 600, inconel 625, inconel 718, incoloy 926, hastelloy, invar, kovar, monel400

Product Category		Specification(mm)		Grade
Heat-resisting Superalloy Anticorrosion Alloy	Hot-rolled Bar	diameter (length of side)	Φ10~85 30~85	FN-2,RA333, A-286,V-57,Inconel706, Incoloy901,Incoloy903, Incoloy907, HastelloyX,Inconel600, Inconel625,HastelloyC-4, HastelloyB,HastelloyC-276,Inconel718,R26,Nimonic80A,Nimonic90,Nimonic93,Nimonic105,Nimonic118,Rene41,InconelX-750,C263, U720Li,Waspalloy,Hastelloy188,Hayness-25,BAT-45Y,AHB-300,GMR-235D,B-1900,In100,Rene100,In713C,TRW-VIA,In738,X-40,Incoloy800,Incoloy800H,Incoloy825,Alloy 20cb3,Inconel 600,Inconel 690,Hastelloy B,Hastelloy B-2,Hastelloy C,C276,Hastelloy C-4,Inconel 625
	Forged Bar	diameter (length of side)	Φ90~250
	Hot-rolled Sheet	thickness×width×length	5.0~8.0×650~700×1000~2000
	Cold-rolled Sheet	thickness×width×length	0.8~4.0×700~1000×400~2000
	Cold-drawn -Steel	diameter             hexagon length of side	Φ8.0~35.0                     S 8.0~32.0
	Forged Shaft	diameter (length of side)	Φ200~450
	Forged Disc	diameter (length of side)	Φ500~1000×≥100
	Forged Die Block	length of side mm	200~500
Precision Alloy	Cold-rolled Strip	thickness×width	0.03~3.0×≤300	Alloy1,AMS7717B,Alloy 3,Type 2,Alloy 4,Alloy 4,FeCrCo250,AMS5221C,ASTM F15,ASTM F29
	Hot-rolled Bar	diameter (length of side)	21~55
	Hot-rolled Flat Steel	thickness×width	3.5~13×≤3008~20×≤450
	Cold-drawing Wire	diameter (length of side)	0.1~8.0
Corrosion-resisting alloy	wire	Diameter	0.1-8mm	Incoloy800,Incoloy800H,Incoloy825,Alloy 20cb3,Inconel 600,Inconel 690,Hastelloy B,Hastelloy B-2,Hastelloy C,C276,Hastelloy C-4,Inconel 625
	pipe	OD×Wall Thickness×Length	65-200mm×1.5-25mm×1000-9000mm
	plate	Thickness×Width×Length	3.5-60×100-700*100-3000mm
	bar	Diameter× Length	10-300mm× 500-5000mm
	Ring	OD×Wall Thickness×Height	200-1500× 20-300× 25-300mm

             

Nitronic 60 (UNS S21800, Alloy 218)

UNS	AISI/ASTM
S21800	Alloy218

Nitronic 60 Chemical composition:

Alloy	%	Ni	Cr	Fe	C	Mn	Si	N	P	S
Nitronic 50	Min.	8	16	59		7	3.5	0.08
	Max.	9	18	66	0.1	9	4.5	0.18	0.04	0.03

Nitronic 60 Physical properties

Density	8.0g/cm3
Melting point	1375°C

Nitronic 60 Alloy minimum mechanical properties in the room temperature

Alloy status	Tensile strength Rm N/mm²	Yield strength RP0.2 N/mm²	Elongation   A5 %	Brinell hardness HB
Solution treatment	600	320	35	≤100

Nitronic 60 Characteristic Nitronic 60 Stainless Steel provides a significantly lower cost way to fight galling and wear compared with cobalt-bearing and high nickel alloys. Its uniform corrosion resistance is better than type 304 in most media. In Nitronic 60 ,chloride pitting is superior to Type 316.

Yield strength at room temperature is nearly twice that of 304 and 316.

Nitronic 60 provides excellent high temperature oxidation resistance and low-temperature impact resistance.

Nitronic 60 Application field:Used extensively in the Power, Chemical, Petrochemical, Food and Oil & Gas industries with an array of uses including expansion joint wear plates, pump wear rings, bushings, process valve stems, seals and logging equipment.

Nitronic 60 Rod